Reference [MIDI]
Setting the drum kit MIDI 
Specifying transmission of 
channel 
Timing Clock messages 
You can specify the MIDI channel for the drum kit. 
This setting specifies whether the MIDI synchronization 
Refer to steps 1   4 of  Basic procedure  to bring up the 
message Timing Clock will be transmitted. 
indication  MIDI DRUM CH  on the display. Then turn the 
Refer to steps 1   4 of  Basic procedure  to bring up the 
dial to select one of the following settings. 
indication  MIDI CLOCK  on the display. Then turn the 
dial to select one of the following settings. 
DRUM CH
DRUM CH
10CH
10CH
CLOCK
CLOCK
ON
ON
  1   16CH 
MIDI channels 1   16 (default: 10) 
  ON (Transmission on) 
MIDI Timing Clock will be transmitted when the MRS 802 
  OFF 
is running (default setting). 
Channel messages (Note On/Off messages) will not be 
transmitted or received. 
  OFF (Transmission off) 
Timing Clock will not be transmitted. 
If you specify a MIDI channel (1   16) for the drum track, 
you can transmit Note On/Off messages from an external 
Timing Clock will be output according to the tempo of the 
MIDI device on that MIDI channel to play the sounds of the 
rhythm pattern/rhythm song that is playing. In order for the 
MRS 802's drum kit. Also, when you play back a rhythm 
external MIDI device to play back in synchronization at an 
pattern (or rhythm song) on the MRS 802, the content of the 
appropriate tempo, you will need to specify the tempo and 
drum track will be transmitted as Note On/Off messages. 
time signature of the rhythm pattern (rhythm song) even if 
you are not using the rhythm section. 
N
OTE
If the  DRUM CH  setting is OFF, Note On/Off messages as 
N
OTE
well as Control Change messages will not be transmitted or 
Timing Clock will be transmitted even if the drum track is 
received. 
muted (DRUM status key out). 
H
INT
  When using MIDI Timing Clock messages transmitted 
from the MRS 802 to synchronize the operation of an 
external MIDI device, you should also turn on transmission 
for Song Position Pointer and Start/Stop/Continue 
messages as well as Timing Clock. 
  When transmitting Timing Clock from the MRS 802, it is 
recommended to turn the drum MIDI channel OFF. 
Synchronization may become unstable if MIDI messages 
other than Timing Clock are also being transmitted. 
ZOOM MRS 802
130






footer




 

 

 

 

 Home | About Us | Network | Services | Support | FAQ | Control Panel | Order Online | Sitemap | Contact

ireland web hosting

 

Our partners: PHP: Hypertext Preprocessor Cheap Web Hosting JSP Web Hosting Ontario Web Hosting  Jsp Web Hosting

Cheapest Web Hosting Java Hosting Cheapest Hosting

Visionwebhosting.net Business web hosting division of Vision Web Hosting Inc.. All rights reserved