Reference [Creating a CD]
Recording audio data by project 
BURN CD
BURN CD
You can select one project and write the contents of its 
TIME
TIME
master track to a CD R/CD RW disc. 
0 534250
Master track length
N
OTE
Before starting the procedure described below, use the 
trimming function on the master track to make sure that it 
7.
To check the available write time on the inserted 
does not include unwanted blank portions at the beginning 
disc, press the cursor down key. 
and end (  p. 49). 
The remaining disc time is shown in the lower part of the 
1.
Insert a CD R/RW disc into the CD R/RW drive. 
display (in minutes/seconds/milliseconds). 
To newly write audio data, use a blank CD R/RW disc or a 
CD RW disc that has been completely erased. 
BURN CD
BURN CD
To add audio data, use a CD R/RW disc that has not yet been 
REMAIN
REMAIN
finalized. 
0740 00
2.
Available write time
Select the project to be used as write source. 
For details on loading projects, refer to page 125. 
Press the cursor up key to return to the previous screen. 
3.
Verify that the V take that you want to write to the 
8.
audio CD is selected for the master track of that 
To audition the source master track, press the 
project. 
PLAY [R] key. To stop playback, press the STOP 
[P] key. 
4.
From the main screen, press the [CD R/RW] key in 
9.
the display section. 
Press the [ENTER] key twice. 
The CD R/RW menu appears. 
The display changes as follows. 
Write target track number
CD R/RW
CD R/RW
AUDIO CD
AUDIO CD
CDtrk01
CDtrk01
SURE?
SURE?
5.
0740 00
Verify that the indication  CD R/RW AUDIO CD  is 
shown on the display, and press the [ENTER] key. 
10.
The audio CD menu appears. 
To carry out the write process, press the [ENTER] 
key. 
Writing on the CD R/RW disc starts. During the write 
AUDIO CD
AUDIO CD
process, the indication  wait...  is shown on the display. The 
BURN CD
BURN CD
counter displays the write progress. 
When writing is complete, the display shows  CDtrkxx 
6.
Verify that  AUDIO CD BURN CD  is shown, and 
COMPLETE  (where xx is the track number). 
press the [ENTER] key. 
The duration of the source master track appears on the 
H
INT
display in hours (H), minutes (M), seconds (S), and 
By pressing the [EXIT] key instead of the [ENTER] key, you 
milliseconds (MS). 
can cancel the write process and return to the previous 
display screen. 
ZOOM MRS 802
112






footer




 

 

 

 

 Home | About Us | Network | Services | Support | FAQ | Control Panel | Order Online | Sitemap | Contact

ireland web hosting

 

Our partners: PHP: Hypertext Preprocessor Cheap Web Hosting JSP Web Hosting Ontario Web Hosting  Jsp Web Hosting

Cheapest Web Hosting Java Hosting Cheapest Hosting

Visionwebhosting.net Business web hosting division of Vision Web Hosting Inc.. All rights reserved