Reference [Recorder]

forward or backward in milliseconds or ticks. 

3.

If you want to change the direction of scrub 

playback, use the cursor left/right keys to cause 

5.

If you want to use the preview function to hear the 

the scrub playback direction indication to flash, 

region before the current location, press the REW 

and turn the dial. 

[T] key. To hear the region after the current 

If you select  TO , scrub playback will begin from an earlier 

location, press the FF [Y] key. 

point and end at the current location. If you select  FRM , 

If you press the REW [

T

] key, a region of 0.7 seconds prior 

scrub playback will begin from the current location (this is 

to the current location will play (ending at the current 

the default setting). 

location). If you press the FF [

Y

] key, a region of 0.7 

seconds following the current location will play (beginning 

TO

TO

FRM

FRM

(Default setting) 

at the current location). This is called  preview playback . 

Current location 

Current location 

When preview playback ends, scrub playback will resume. 

Scrub playback 

Scrub playback 

6.

To cancel the scrub function, press the STOP [P] 

key. 

The unit returns to the main screen. 

H

INT

Any change you make to the scrub settings will take effect 

immediately. 

Changing the settings of the scrub 

4.

If you want to use the new scrub playback settings 

function 

to find a location, use the cursor left/right keys to 

move the flashing area to the unit displayed at the 

When the scrub function is on, you can change the direction 

right of the counter ( MS  for time display, or 

of the scrub playback (whether it will play the region before 

 TICK  for measure display). 

or after the current location), and the length of the scrub 

playback region. 

5.

Turn the dial to the left or right to move the current 

1.

From the main screen, hold down the STOP [P] 

location. 

key and press the PLAY [R] key. 

During scrub playback, the current location can be moved 

This turns the scrub function on, and the following screen 

forward or backward in milliseconds or ticks. 

will appear. The characters in the lower left (TO/FRM) 

indicate the direction of scrub playback, and the number in 

6.

To exit the scrub function, press the STOP [P] key. 

the lower right (40   200) is the length of scrub playback. 

The unit returns to the main screen. 

SCRUB

SCRUB

04

FRM 40ms

FRM 40ms

2.

If you want to change the length of scrub playback, 

use the cursor left/right keys to cause the scrub 

playback length setting to flash, and turn the dial. 

You can select 40, 80, 120, 160, or 200 (ms) as the length of 

scrub playback. 

H

INT

You can also use the cursor up/down keys to change the 

scrub playback length. 

ZOOM MRS 802

45