Reference [Recorder]
2.
Use the cursor up/down keys to bring the 
8.
To carry out the mixdown operation, press the 
indication  TR XX XX  onto the display (where X is 
ZERO [U] key to return to the beginning of the 
the track number and V take number). 
song, and then press the PLAY [R] key while 
holding down the REC [O] key. 
Recording on the master track starts. 
TR 2  1
TR 2  1
GTR 2  1
GTR 2  1
9.
When recording is complete, press the STOP [P] 
3.
key. 
Press the [MASTER] status key to select the 
master track. 
The number and name of the V take currently selected for 
Playing the master track 
the master track appear on the display. (If nothing is 
recorded on the V take, the indication shows  NO DATA .) 
To play the recorded master track, proceed as follows. 
1.
From the main screen, press the [MASTER] status 
TR M  1
TR M  1
NO DATA
NO DATA
key several times, until the key is lit in green. 
The unit goes into master track playback mode. In this 
mode, all other status keys are out, all other tracks are 
H
INT
Instead of pressing the [MASTER] status key, you can also 
muted, and all effects are switched off. 
use the cursor left/right keys to select the master track. 
4.
If you want to change the V take, turn the dial. 
5.
When the V take has been selected, press the 
[EXIT] key. 
The [TRACK PARAMETER] key goes out, and the unit 
returns to the main screen. 
6.
From the main screen, press the [MASTER] status 
key several times, until the key is lit in red. 
The master track is now ready for recording. 
Master track 
While the key is lit in red, the other tracks as well as the 
drum track and effects operate normally. 
H
INT
H
INT
While the [MASTER] status key is lit in green, the transport 
The signal recorded on the master track is the signal coming 
keys except for the REC [O] key operate normally. 
from the [MASTER] fader. This is the same signal that is 
supplied at the OUTPUT jacks. 
2.
Press the ZERO [U] key to return to the beginning 
7.
of the song, and then press the PLAY [R] key. 
Set the recorder to playback and adjust the mixing 
balance of the various tracks. 
Playback of the master track starts from the beginning. You 
can use the [MASTER] fader to adjust the playback volume. 
The individual track level settings as well as the insert effect 
and send/return effect settings all have an influence on the 
signal that is sent to the master track. Adjust levels while 
watching the L/R level meter, and make sure that no signal 
clipping occurs. 
ZOOM MRS 802
38






footer




 

 

 

 

 Home | About Us | Network | Services | Support | FAQ | Control Panel | Order Online | Sitemap | Contact

ireland web hosting

 

Our partners: PHP: Hypertext Preprocessor Cheap Web Hosting JSP Web Hosting Ontario Web Hosting  Jsp Web Hosting

Cheapest Web Hosting Java Hosting Cheapest Hosting

Visionwebhosting.net Business web hosting division of Vision Web Hosting Inc.. All rights reserved