Reference [Recorder]
Moving to a desired point in the 
Re recording only a specified 
song (Locate function) 
region (Punch in/out function) 
You can specify a location within the song in time units 
Punch in/out is a function that lets you re record just a 
(minutes/seconds/milliseconds) or in measure units 
specified region of a previously recorded track. The action 
(measure/beat/tick) units, and move to that location. 
of switching a currently playing track to record mode is 
called  punch in , and the action of switching back from 
Hour           Second
Measure             Tick 
recording to playback is called  punch out . 
The MRS 802 provides two ways to do this. You can use the 
01012660 307  2  2
panel keys or a foot switch (sold separately) to punch in/out 
 Minute      Millisecond
Beat
manually ( manual punch in/out ), or you can cause punch 
in/out to occur automatically at previously specified points 
1.
( auto punch in/out ). 
With the recorder stopped, use the cursor left/right 
keys from the main screen to move the flashing 
part to the unit you want to change. 
Using manual punch in/out 
For example, to change the minutes, cause the segment 
marked  M  to flash. 
This section describes how to perform manual punch in/out 
to re record a region of a previously recorded track, using 
the panel keys or a foot switch (sold separately). 
01012660 307  2  2
H
INT
If you want to use a foot switch for punch in/out, connect the 
2.
Turn the dial to specify the numeric value. 
ZOOM foot switch FS01 (option) to the [CONTROL IN] jack 
on the front panel. 
On the time indication, minutes, seconds, or milliseconds 
can be specified. On the measure indication, measures, 
N
beats, or ticks can be specified. When you change the 
OTE
In the default condition of the MRS 802, a foot switch 
displayed value, the unit immediately moves to the new 
connected to the [CONTROL IN] jack is set to control 
location. Pressing the PLAY [
R
] key starts playback from 
recorder playback/stop. If you want to use the foot switch for 
that point. 
punch in/out, you must first change the foot switch setting 
(
 p. 135). 
1.
Repeatedly press the status key of the track on 
which you want to perform punch in/out, until the 
key is lit in red. 
2.
Raise the fader of this track to a suitable position. 
3.
While playing the instrument connected to the 
input jack, use the [INPUT] control and [REC 
LEVEL] control to adjust the recording level. 
As necessary, play back the recorder and use the faders of 
the mixer section to adjust the mix balance of your 
instrument and the playback of the tracks. 
4.
Locate a point several measures before the 
intended punch in point, and press the PLAY [R] 
ZOOM MRS 802
35






footer




 

 

 

 

 Home | About Us | Network | Services | Support | FAQ | Control Panel | Order Online | Sitemap | Contact

ireland web hosting

 

Our partners: PHP: Hypertext Preprocessor Cheap Web Hosting JSP Web Hosting Ontario Web Hosting  Jsp Web Hosting

Cheapest Web Hosting Java Hosting Cheapest Hosting

Visionwebhosting.net Business web hosting division of Vision Web Hosting Inc.. All rights reserved