#   Please note the port number used in example above! 

#   Web support uses the same port as the AVG DataCenter support, therefore  

#   the port number for updates is specified using the Port parameter 

#   (see above)   and the default value is 4156. 

#   HttpServerRoot=/avgupdate 

# By default the AVG TCP Server does not log HTTP requests. If the following 

#   option is used then all HTTP GET requests are logged in the "Apache 

#   Server Combined log file format" into the file specified. 

#   HttpLogPath=c:\Logs\avgtcp_http.log 

# If limited HTTP support is active (see above), the following options control  

#   behavior of update scheduler and check for update by AVG InetLite 

# The following option defines the URL to be used for downloading update files.  

#   Default value is http://www.grisoft.cz/softw/70/update. 

#   UpdateURL=http://www.grisoft.cz/softw/70/update  

# Specified server and account is used for proxy connection  

#   http://user:password@server:port 

#   Proxy= 

# Scheduler can be set into 5 modes. If set to 0, it is turned off.   

#   Set to 1 means update at startup 

#   Set to 2 means update every N minutes (N is set by another option) 

#   Set to 3 means update every N hours (N is set by another option) 

#   Set to 4 means update in specific times 

#   CheckMode= 

# If CheckMode is set to 2 or 3 (periodic update each N minutes/hours), 

#   the following option defines the N (period of update) 

#   CheckPeriod=5 

# If CheckMode is set to 4,  

#   the following option specifies times in which updates will be checked for 

#   example: CheckTime=9:00|12:00|15:30|23:47 

#   CheckTime= 

Attention! 

All the comments will be erased after using the configuration dialog in the AVG TCP Monitor application! 

A list of the most important parameters and information on how and when to use them follows: 

a)

Port 

If you want to change the number of the communication port to 4444 for example, delete the `#' 

character before the Port=80 value and enter the desired new port number, 4444. If you want to use 

another port of connection, e.g. port 80, be sure that there is no other application running on this port 

(for example a web server). This port is also used for reduced http protocol functionality, which offers 

update features for clients in the local network. 

Attention! 

While changing the port number in the configuration file, you also have to change it in the 

communication string, which defines the connection between AVG clients and AVG DataCenter! 

Note:  

Default port number is 4156. 

# AVG TCP Server configuration file 

# Specifies the port that AVG TCP Server will use for incoming connections 

Copyright (c) 1992 2005 GRISOFT, s.r.o. All rights reserved. 

43