Chapter 8      Command Reference

Privilege Level 15 Commands

Step 2

Set the system clock to a time that is behind the time on the NTP server using the 

clock set command.

Step 3

Enter the ntp server command again to configure the NTP server on the system. 

For example:

ntp server 

ip address

Example

This command configures the system to use an NTP server:

ntp server 209.165.201.0 

This command configures the system to stop using the NTP server:

no ntp server 209.165.201.0 

Related Command

clock, page 8 14

poller

Use this command to display or change the polling interval for views and reports. 

You can change the views interval from 2 to 15 minutes. You can change the 

reports interval from 5 to 30 minutes. If you do not enter parameters, the 

command displays the current values for the report and view polling intervals. 

The values entered and displayed are in minutes.

poller [help |  report (interval) | view (interval) ]

Syntax Description

help List 

help 

file.

report 

Set the polling value in minutes for reports.

view 

Set the polling value in minutes for views.

reload

To reboot the system, use the reload command:

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

8 36

OL 6319 01