Display array properties and members 

1. From 

the 

Adaptec Embedded SATA HostRAID Controller#0 Array Configuration 

Utility menu, select Manage Array. 

2. From 

the 

List of Arrays dialog box, select the array you want to view and press 

Enter. 

The Array Properties dialog box appears, showing detailed information on the array. 

The physical disks associated with the array are displayed here. 

3. Press Esc to return to the previous menu. 

Deleting Arrays 

Warning 

Take caution in using this option; All data on the RAID drives will be 

lost! Deleted arrays cannot be restored. 

1. From 

the 

Adaptec Embedded SATA HostRAID Controller#0 Array Configuration 

Utility menu, select Manage Array. 

2. 

Select the array you wish to delete and press Delete. 

3. In 

the 

Array Properties dialog box, select Delete and press Enter. The following 

prompt is displayed: 

WARNING: Deleting the array will result in data loss! 

Do you want to delete the array? (Yes/No): 

4. Press 

Yes to delete the array or No to return to the previous menu. 

5. Press 

Esc to return to the previous menu. 

4.5 Create Array 

Before creating arrays, make sure the disks for the array are connected and installed in 

your system. Note that disks with no usable space, or disks that are uninitialized are 

shown in gray and cannot be used. 

===Adaptec Embedded SATA HostRAID Controller#0 Array Configuration Utility=== 

 Main Menu 

Manage Array 

Create Array 

A  

dd/Delete Hotspare 

Initialize Drives 

Create an Array 

67 

              http://www.TYAN.com