Before You Begin

83

and, if there is an Ethernet card in the machine /etc/init.d/network might

look like:

#!

/bin/sh

# Configure the loopback device

ifconfig lo 127.0.0.1

route add 127.0.0.1

# Configure the Ethernet device

ifconfig eth0 192.64.1.1

route add  net 192.64.1.0

route add  net 0.0.0.0 gw 192.64.1.1

If you still have questions about the correct values for the various addresses

and masks that will be requested during the installation ask the local network

administrator or your Internet Service Provider, depending on which provides

the Internet access for the machine.