Reference [Track Editing]

Editing using V takes 

4.

Press the [UTILITY] key in the display section. 

A menu for editing audio data in track units appears on the 

Recorded audio data can also be edited in V take units. You 

display. 

can for example exchange the data on two V takes, or delete 

a V take that is no longer needed. 

ERASE

ERASE

TR 1  1

TR 1  1

Basic V take editing steps 

5.

Repeatedly press the [UTILITY] key to call up the 

When editing audio data in V take units, some steps are 

desired command. 

similar for each action. These are as follows. 

The following editing commands are available. 

1.

From the main screen, press the [TRACK 

PARAMETER] key in the track parameter section. 

  ERASE 

Erase the audio data on a specified track/V take. 

2.

Use the cursor up/down keys to bring up the 

  COPY 

following indication on the display. 

Copy the audio data of a specified track/V take to another 

In this condition, you can switch V takes. 

track/V take. 

  MOVE 

Move the audio data of a specified track/V take to another 

TR 1  1

TR 1  1

track/V take. 

  EXCHG (Exchange) 

Exchange the audio data of a specified track/V take with the 

While this screen is shown, the level meter's dot flashing/lit/

data of another track/V take. 

out status indicates the V take selection and the presence or 

absence of audio data. 

H

INT

If necessary, you can also change your selection of track and 

V take from this screen. 

6.

Press the [ENTER] key. 

The subsequent steps will differ, depending on which 

V 

1

take 

Lit: recorded V take 

2

command was selected. See the sections for the respective 

3

4

commands. 

5

Flashing: currently selected V take 

6

7

8

Out: unrecorded V take 

7.

When the editing command has been executed, 

9

10

repeatedly press the [EXIT] key to return to the 

Track

main screen. 

3.

Use the cursor left/right keys and the dial to select 

a track and V take. 

The status key for the currently selected track is lit in 

orange. You can also press a status key to select a track. 

It is also possible to select the master track. In this case, the 

indication shows  M  1  and the [MASTER] status key is 

lit. 

ZOOM MRS 802

53