Chapter 8      Command Reference

Privilege Level 15 Commands

The following command deletes the above route:

no route 209.165.201.0 netmask 255.255.255.224

services

To list, start, or stop the management services running on the system, use the 

services command:

services [status | start | stop]

Syntax Description

status

Displays the management services status.

start

Starts the management services.

stop

Stops the management services.

Usage Guidelines

Use this command to start, stop, or view status of the management services 

running on the system. 

Management services are the software installed on the system by network 

management applications. Use this command to stop and restart the management 

services if the system is not responding correctly to a management application. 

This should cause the services to reset and function properly again.

Example

This command stops management services:

services stop

This command starts management services:

services start

This command shows services status:

# services status

Process= HSECollector

        State  = Running but busy flag set

        Pid    = 588

        RC     = 0

        Signo  = 0

        Start  = 06/15/01 16:54:32

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

OL 6319 01

8 43