Chapter 8      Command Reference

Privilege Level 15 Commands

EX 1.0a 1.0a HSE 1.0 UPDATE Hosting Solution...

EX 1.0aR 1.0aR HSE 1.0 UPDATE Hosting Solution...

EX 1.0 ROB1.0 HSE 1.0 COMPLETE Hosting Solution...

EX 1.0 1.0 HSE 1.0 COMPLETE Hosting Solution...

Related Topics

install configure, page 8 22

install update, page 8 23

interface

To configure an Ethernet interface, use the interface command:

interface eth<0 5> {[up | down] | ipaddress netmask [default gateway 

address] [up | down]}

Syntax Description

eth<0 15>

Name of the interface port to be configured. Acceptable 

values are eth0 5.

up

Enables the interface (the default).

If you include the ipaddress parameter and want to enable 

the interface in the same command, either enter the up 

parameter after ipaddress and its required parameters, or do 

not specify the up or down parameters (up is the default).

down

Disables the interface.

If you include the ipaddress parameter and want to disable 

the interface in the same command, enter the down 

parameter after ipaddress and its required parameters.

ipaddress

The IP address of the interface.

netmask

The netmask of the interface IP address.

default gateway

Changes the IP address of the default gateway that connects 

the Hosting Solution Engine to the network.

address

The gateway IP address.

User Guide for the CiscoWorks Hosting Solution Engine 1.8.1

OL 6319 01

8 25