Appendix 7: Arguments

257

pas16=iobase,irq

This card uses the NC5380 SCSI chip and usually ex 

pects the iobase to be 0x388. If the irq value is given

as 255, then the card will operate without interrupts, at

a reduced capability.

st0x=mem base,irq

This probe code also expects to find a bios and will not

find the card if there is no BIOS. This argument will

force detection of the card. mem base is the memory

mapped I/O region of the card and uses values: 0xc8000,

0xca000, 0xcc000, 0xce000, 0xdc000, 0xde000.

t128=mem base,irq

These cards also use the NC5380 SCSI chip and expects

the following values for mem base: 0xc8000, 0xcc000,

0xd8000, 0xdc000.

The following cards do not accept arguments:

Always IN2000 Adaptec aha1740

EATA DMA

EATA PIO

Future Domain 16xx

NCR5380 (generic)

NCR53c7xx to

NCR53c8xx

Qlogic

Ultrastor

Western Digital wd7000